skip to Main Content
(+1) 8665393032
Netgear N600 Wi-Fi Range Extender

The Netgear N600 overcomes all the entire Wi-Fi-dead-spots within your house or office.

It’s extremely simple to set up this amazing range extender. It’s easy in the fact that you will see the result in less than ten minutes of setup. All the areas of your place that used to have a weak reception will start to have a strong signal within a twinkle of an eye. The trick to making this happen is to find a place in your house that still has a good signal but is close enough to the “dead spots” that it will cover those areas once it’s turned on.

Features of the Netgear N600

The following are the benefits and features of this amazing Universal Wi-Fi Range Extender

Fast lane mode

The N600 also has the Fastlane” mode characteristics where the extender applies its resources only to one band thereby boosting the speed as well as the performance of the range extender.


There exists a noticeable variation amidst the speed of the router’s signal as well as the signal from the range extender.

Dual Broadcast

The NETGEAR Universal Dual-Band Wi-Fi Range Extender, 4-port Wi-Fi adapter lengthens dual-band Wi-Fi coverage for your home wireless network or your office network. It operates with several standard gateways and also facilitates a more dependable Wi-Fi connection for desktop, laptops, smartphones, etc.

Steps on how to set up the Netgear Wi-Fi Range Extender

The below-listed steps are necessary to be observed in other to set up the Netgear Wi-Fi Range Extender with ease. However, if you find it challenging to set up after you might follow the below procedures; simply give us a call via our customer care representative toll-free number 1-866-0533-032.

  • First, un-box the extender from its pack.
  • Plug the Netgear N600 into the power source.
  • The LED light turns red when there is an unsuccessful setup connection.
  • Place the extender where the main Wi-Fi web router is placed.
  • Press the WPS switch on the Wi-Fi router. On pressing this, the WPS led will appear in solid green as a proof of good connectivity between your Wi-Fi router and your extender.
  • If your Wi-Fi supports about 5GHz or above and you feel like extending it, just repeat the WPS process.
  • Remove the extender from the power source and then plug again in the power source and wait for the LED light to switch on.

Haven read through the benefits and features of this Universal Wi-Fi Range Extender, I hope that now you are well convinced and you can make it as your number one choice to go for. Thanks for reading and stay tuned for more write-ups from our side. Till then, God bless!

Back To Top